Introduction Description Schematic Instructions Software Vintages Differences with TEMP05 FAQ HomeSeer Setup News References Ordering Information Download the Instruction Manual Here
(we're not kidding - we get a lot of e-mails with questions that are already addressed in the Frequently Asked Questions web page)
Ordering Information
The TEMP08 is orderable with several options. The part numbers are shown below. Orders can be placed at the link here or simply by clicking on the PayPal buttons below.
| MD2102 | The blank PCB |
|
| MD2103 | The processor with the latest software installed for TEMP08 |
|
| MD2104 | An assembled and tested unit equipped with the basic functionality. |
|
| MD2105 | As MD2104 but with the addition of an on-board humidity sensor |
|
| MD2107 | As MD2104 but with the addition of the
components required for interfacing to the Midon RELAY05 relay driver
IMPORTANT NOTE: V2.0 and higher versions of TEMP08 no longer support the RELAY05 interface. |
|
| MD2110 | A case for the TEMP08 or LOG08, all options. |
|
| MD2111 | A front panel for the MD2110 case |
|
| MD2112 | A case and front panel for the TEMP08 or LOG08 (see picture below) |
|
| MD3004 | 12 Volt Adapter for TEMP08 |
|
| MD3005 | 12 Volt Adapter for MD2107 version of TEMP08 |
|
A power supply is required for use of these products. Use a Midon MD3004 power supply for all versions except MD2107, which requires a Midon MD3005 power supply.
Note: the case and panel are optional parts
Hardware Upgrade Options
| Upgrading
from |
Upgrading
to |
Adding
functionality |
Order
Kit # |
|
|
MD2104 |
MD2105 |
Humidity Sensor |
MD2205 |
|
|
MD2104 |
MD2107 |
RELAY05 Driver |
MD2207 |
|
|
MD2104 |
|
On-board temperature
Sensor |
MD3003 |
|
| any | any | Return to Factory upgrade or repair | MD2210 |
|
Midon Design would be pleased to upgrade your unit for you. Order the Return to Factory upgrade option and let us do the soldering and testing.